Review Your Lockout/Tagout Procedures Annually. The first step in an annual audit is to perform a review of all machine-specific lockout/tagout procedures. The purpose of the procedure audit is to identify any deviations or inadequacies in the current procedure. When you review a procedure, be sure to ask these three questions: Lockout. The placement of a lockout device on an energy isolating device, in accordance with an established procedure, ensuring that the energy isolating device and the equipment being controlled cannot be operated until the lockout device is removed. Lockout device. A device that utilizes a positive means such as a lock, either key or Lock Out. In a lockout, a device specifically used for energy control procedures is placed on the energy isolating device, such as a valve, switch, or circuit breaker in accordance with a specific procedure. The primary purpose of a lockout, as noted by OSHA’s Control of Hazardous Energy standard, is to ensure that the energy isolating device In the Lockout/Tagout Procedure, if more than one individual is required to lock out equipment, each shall place his or her own personal lockout device or tagout device on the energy-isolating device (s). When an energy-isolating device cannot accept multiple locks or tags, a hasp or lockbox may be used. Response: No. 29 CFR § 1910.147(f)(3)(ii)(D) requires each authorized employee to affix a personal lockout device to the group lockout device, group lockbox, or comparable mechanism when he or she begins work and to remove those devices when he or she stops working on the machine or the equipment being serviced or maintained. 2.0 SAFETY. All District Safety Procedures regarding Traffic Safety, Electrical Safety, Lockout/Tag out, Respiratory Protection, Confined Space, Hearing Protection, and Illness and Injury Prevention must be adhered to. Hearing Protection is always required when entering pump and lift stations. Pre-atmospheric checks, using a calibrated gas Lockout/tagout procedures are crucial for the security and health of employees. Employers can avoid major injuries and even death by starting a lockout/tagout program. Workers are kept safe, and accidents are avoided by providing proper training and equipment, performing frequent equipment inspections, updating lockout/tagout rules, and 6110T1: LOTO Procedure. allows using tags alone as the sole means of placing equipment out of service. Before the tagout option is permitted, the , line supervisor, and Hazardous Energy Control (HEC) or division Environmental, Safety, and Health (ES&H) coordinator must determine if. A lockout device for that equipment is not commercially available. X9n4z.

lock in lock out procedure